Bending Machine Model GT-Standard Manually

Item No. 14702100
First developed manually-controlled tube bender for seamless precision tubes of steel and 25CrMo4 Chrome Moly tubes. This model mainly gained popularity for its consistency and accuracy in comparison with the price. This machine is easy to adjust for tubes with an outer diameter of 20 to 50 mm and a
Low stock
PCS
Price
€ 310,00
price per PCS
excl. tax

View volume discount

Quantity UOM Price Prijseenheid
1 PCS € 310,00 per stuk
This product cannot be ordered at the moment.
Specifications
Kleur Zwart
Brand GT
Material Staal
Tube capacity 20-50 mm
Type Standaard
Geschikt voor Buizen
Description
First developed manually-controlled tube bender for seamless precision tubes of steel and 25CrMo4 Chrome Moly tubes. This model mainly gained popularity for its consistency and accuracy in comparison with the price. This machine is easy to adjust for tubes with an outer diameter of 20 to 50 mm and a wall thickness between 1,5 to 3,0 mm.  

Please note: 
Check if the wall thickness of the required tube diameter lays between the minimum and maximum wall thickness mentioned at the concerning Die Sets.
Model Standard die sets and accessories are not interchangeable with the model XTRA die sets and accessories!

Important: 
Limited suitability for stainless steel tubes (304 grade Only) and not suitable for aluminum tubes.

The GT-bender Model Standard does not include floor stand and die sets.

The manual control can optionally upgraded to a hydraulic control.
Strongly recommended if you are going to bend (a lot of) tubes with a diameter from 45 mm because then the physical of the user can be a limiting factor.

The following die sets can be ordered optionally:
Art. nr.Ø OutsideRadius Min. WTMax. WTPrice
Die-sets 180° for round tubing
1470214020 mm76 mm1,5 mmSolid€ 175,00
1470214222 mm89 mm1,5 mmSolid€ 215,00
1470214525 mm89 mm1,5 mmSolid€ 215,00
1470214828 mm114 mm1,5 mm3,0 mm€ 295,00
1470215030 mm114 mm1,5 mm3,0 mm€ 295,00
1470215132 mm140 mm1,5 mm3,0 mm€ 325,00
1470215235 mm140 mm1,5 mm3,0 mm€ 335,00
1470215438 mm165 mm2,0 mm3,0 mm€ 350,00
1470215540 mm165 mm2,0 mm3,0 mm€ 365,00
1470216045 mm165 mm2,5 mm3,0 mm€ 379,00
1470216250 mm165 mm3,0 mm3,0 mm€ 419,00
Die-sets 180° for square tubing
1470221020x20 mm76 mm2,0 mm3,0 mm€ 195,00
1470221525x25 mm89 mm2,4 mm3,0 mm€ 239,00
1470222030x30 mm114 mm2,4 mm3,0 mm€ 369,00
1470223540x40 mm165 mm2,4 mm3,0 mm€ 389,00
Die-sets 180° for gaspipes
1470226021,34 | = ½” Inner89 mm2,77 mm2,77 mm€ 185,00
1470226526,67 | = ¾” Inner114 mm2,87 mm2,87 mm€ 265,00
1470227033,40 | = 1” Inner140 mm3,38 mm3,38 mm€ 300,00
1470227542,16 |=1¼” Inner165 mm3,56 mm3,56 mm€ 340,00


    Loading
    Loading