Deutsch (Deutschland)
Nederlands (Nederland)
Francais
Die Set 21,34 mm (1/2") GT-Standard
Item No.
14702260
Suitable for our GT bending machine model Standard for bending round steel gas pipes with outside diameter of 21,34 mm (inside diameter 1/2“). Fast change of bending block made from solid steel with a lifetime guarantee against breakage. This steel bending die eliminate the problems that often occur
Specifications
| Brand | GT |
| Material | Staal |
| Buisdiameter | 21,34 mm, 1/2"" |
| Geschikt voor | Buis, GT buigers standaard |
| Radius | 88,9 mm |
| Radius | 88,9 mm |
Description
Suitable for our GT bending machine model Standard for bending round steel gas pipes with outside diameter of 21,34 mm (inside diameter 1/2“). Fast change of bending block made from solid steel with a lifetime guarantee against breakage. This steel bending die eliminate the problems that often occur with aluminum die sets such as fracture and groove spreading.
Set consists of a bending block with clamping bolt, follow block with inserts, U-Clamp and a degree indicator.
Please note!
Gas pipe can only be bent if the wall thickness meets the value as indicated in the table below.
Important:
Limited suitability for stainless steel pipes (only 304 quality) and not suitable for aluminum pipes.
Die Set 180° Gaspipe:
Set consists of a bending block with clamping bolt, follow block with inserts, U-Clamp and a degree indicator.
Please note!
Gas pipe can only be bent if the wall thickness meets the value as indicated in the table below.
Important:
Limited suitability for stainless steel pipes (only 304 quality) and not suitable for aluminum pipes.
Die Set 180° Gaspipe:
Art. nr. | Ø Outside | Ø Inside | Radius | Min. WT | Max. WT |
14702260 | 21,34 mm | 1/2 Inch | 89 mm | 2,77 mm | 2,77 mm |